High-voltage and low-voltage equipment

Electromagnetic contactors KT-6000 are devices that are used to switch on and off electrical energy receivers. They have an open design with natural air cooling. Our KT-6000 contactors meet ТУ У 31.2-22820979-003:2007.

Products list:

• KT-6012
• KT-6013
• KT-6014
• KT-6022
• KT-6023
• KT-6024
• KT-6032
• KT-6033
• KT-6034
• KT-6043
• KT-6053
• KTP-6012
• KTP-6013
• KTP-6032
• KTP-6033
• KTP-6022
• KTP-6023

Automatic switches are devices that are used to protect electrical installations from overloads and short circuits, and in particular, insulated cables and wires from excessive heating under these conditions.

Products list:

• A-3124
• A-3716

Limit switches are devices that are used to switch on and off control circuits of mechanisms. They are designed for operation in temperate, cold and tropical climates, category of placement 2. Our end switches meet ТУ У 31.2-22820979-001:2005.

Products list:

• VU-701
• NV-701
• KU-701
• KU-703
• KU-704
• KU-706

Arresters are devices that protect electrical equipment from atmospheric overvoltages. They are designed for networks with any neutral grounding system and meet ТУ У 31.2-22820979-002:2007.

Products list:

• RVN-0,5 У1
• RVN-1 У1
• RVO-6
• RVO-10
• RVS-33
• RVS-35
• RVS-110

Non-linear overvoltage limiter (OPN) is a protection element without spark gaps. The active part of the OPN consists of alloyed metal, when voltage is applied, it behaves like a set of series-connected varistors. The principle of operation of the OPN is based on the fact that the conductivity of varistors depends nonlinearly on the applied voltage.

Products list:

• OPN-0,22
• OPN-0,38
• OPN-0,4
• OPN-6
• OPN-10
• OPN-35
• OPN-110
• OPN-150